After some time with the other sequencers I got I learned what I wanted in a performance device and it seemed an arp is what I need. This build is straight forward but there are a lot of connections to mess up so… 😬😄 Link to YMNKs Page: Here Github repo with Version I built: […]
This build is easy but I expanded it a bit. First of all there is a simple version from ginkosynthesis and I found out the AE Modular version had a couple more ins and outs as well as a switch to use more formwares using the Mozzi Lib. The second part was to make it […]
I built some drum modules but needed a sequencer to trigger them. Until then I used the clock and the divider to build simple drum rhytms and that worked fine, but having something more complex is way more fun I can tell you. Link to the original project page: Here There’s an alternative firmware: Here […]
I found several references about this noise drum module (MiaW I think) and built the Hihat version and it works nicely.
This FUZZ effect ist the easiest you can build and it sounds okay. I added an input attenuator to bring the signal level down and replaced the trimmer with another pot for the output level. In hindsight I’d probably remove the output attenuator. Also an opamp gain stage get the signal level back up would […]
Ar some point needed more LFOs and found a stripboard layout that was verified from someone else (sorry idk where from anymore). So about the build. I followed the original layout to the point of the wave mixing pot. I just left that one out – in hindsight not the best idea but the space […]
I always wanted a couple of filter designs in my modular and this one takes up near to no space and works fine imo. Original project page: Here
This module outputs five types of noise. The whitenoise variants are usable for creating percussive sounds, but also to add a broad spectrum to any oscillator before filtering. I especially like the grainy noise as it adds crackling and ambience like vinyl soinds when filtered right. Original project page: Here
I can’t remember where I got the PDF from maybe Reddit but I built the simplest version of it and it works fine. You can modify pitch/frequency and decay.
This was the second active mixer I built and I wanted some more features as in the first one so I extended the first design a bit. Every channel can be muted and there is a gain stage at the output. i am really happy with this design because I have a couple of modules […]
knopsl modular 